MF Flow Sensor
Details
MF series electromagnetic flowmeter is composed of a sensor and a converter. It works based on Faraday's law of electromagnetic induction. It is used to measure liquid or solid conductive media. The conductivity is generally greater than 20μS/cm. （The electrical conductivity of water is about 100-500 μS/cm), which can be used to measure various media such as acid, alkali, salt solution, pulp, and mineral pulp, but the medium cannot contain more ferromagnetic substances or a lot of bubbles.
Features:
1. The instrument adopts dual-frequency excitation, which is not affected by the common frequency
2. Low instrument power consumption
3. After the pipe is empty, it will automatically detect and make the data zero and alarm to prevent misoperation of the flowmeter data caused by the jump of the empty pipe.
4. High measurement accuracy, display value ±0.2%
5. Wide measuring range
6.The EMC index of the flow meter meets the requirements of the IEC61000-1995 standard.
Electrical parameters
| Performance | MF | ||||
| Nominal diameter | DN6-DN3000 | ||||
| Nominal pressure | 0.6-4.0MPa (special pressure can be customized) | ||||
| Accuracy | ±0.5% of indication; selectable indication of ±0.3% or ±0.2% | ||||
| Lining material | PTFE polytetrafluoroethylene, polyurethane rubber, polychloroprene rubber, PFA, F46 | ||||
| Electrode form | Standard type, scraper type, replaceable type | ||||
| Electrode material | ≥5uS/cm (below 5uS/cm to negotiate order with our company) | ||||
| Medium temperature | 316L, Hastelloy B, Hastelloy C, titanium, tantalum, platinum-iridium alloy, stainless steel coated with carbonized tungsten | ||||
| Ambient temperature | Integrated | -25℃~70℃ | |||
| Split type | Polychloroprene rubber/polyurethane lining -20℃~60℃ | PAF/F46/Silicone rubber lining -40℃~160℃ | |||
| Environment humidity | -20℃~60℃ | ||||
| Environment humidity | 5~100%RH | ||||
| Dielectric conductivity | ≥20μS/cm | ||||
| Measuring range | 1500:1 Flow velocity setting ＜15m/s | ||||
